HowTo.. Tell a Friend

HowTo..Configure a Remote Screen

When using a remote display (eg Wyse Terminal) with Version 5  it usually needs to be configured with the following main settings:

  Baud Rate 9600  
  Data Bits 8  
  Parity None  
  Stop Bits 1  
  Screen Saver OFF  

The Cable is normally connected to Serial Port 1

On Wyse Terminals setup is sometimes accessed by Holding the SHIFT Key and Pressing SELECT 

 

 

  

Resources

You'll find User Guides and Manuals in Downloads



 
Copyright 2012 TCL Systems Ltd